Set the time and calendar manually
Since the unit works on receiving the time
radio signal, there may be locations that the
signal is weak and cannot be properly
received. Under such circumstance, the radio
signal mark will
disappear
to indicate that
reception failed. Try to rotate the unit or
place it in other location to achieve
better
reception and re-start reception again. If the
radio signal cannot be received, time
should
be
set
manually.
To set time and calendar, press and hold the
SET
/
RECEIVE BUTTON until the year
digits flash (
"setting year"
will be
announced). Press the UP or DOWN
BUTTON to adjust.
Press SET
/
RECEIVE
BUTTON
once. The
time zone mark will flash (
"setting time
zone"
will
be announced). Set to
"P"
(PACIFIC)
/
"M"
(MOUNTAIN)
/
"C"
(CENTRAL)
/
"E"
(EASTERN) time zone
by pushing the UP or
DOWN BUTTON.
Press SET
/
RECEIVE BUTTON on9e. The
hour and minute digits flash (
"setting
time"
will be announced). Press the UP or DOWN
BUTTON to adjust. Each push of the UP or
DOWN
BUTTON will adjust one minute
and the hour will be changed when 00
minute is run through.
Press SET
/
RECEIVE
BUTTON
once will end
the setting mode (
"setting
complete"
will
be
announced).
During setting, press and hold the UP or
DOWN BUTTON
and
the corresponding
digits
will
fast advance.
Note: when
s
etting
year,
date, time
zone
or
time, the corresponding
digits
will
be
announced.
e.g. setting year to 2010:
''year two
thousand and ten"
will be announced
setting
date
to January 10
th
(Saturday):
"Saturday,
January tenth"
will
be
announced.
Setting time zone to "P" (Pacific):
''pacific standard time"
or
'
'pacific
daylight saving time-"
will be
announced.
setting time to PM 2:30:
"
half past
two
PM"
will be announced.
Set the alarm time
To start alarm time setting, press any one of
the UP or DOWN BUTTON once. The alarm
time
digits
will flash (
"alarm set''
will
be
announced). Another push of the UP or
DOWN BUTTON will set the alarm minute,
while the hour will be changed when "00"
minute is run through. Press and
.
hold the
UP
or
DOWN BUTTON
and the digit
will
fast advance. To end the alarm setting
mode, just leave the unit (buttons) untouched
for about 5 seconds.
Alarm
on/off and
hourly
announcement
BUTTON and the alarm will be
stopped and
rest1;me after
5 minutes.
To stop the
alarm,
place the
ALARM
SWITCH to
"OFF"
or
"(<<[) "
(HOURLY
ANNOUNCEMENT)
position.
