OR
QUICK GUIDE
Please review this guide carefully before using the product.
· Charging Time
100 minutes
(On full discharged: 150 minutes)
· Operating Time
100 minutes (Two times of mop
cleaning with one full charging)
After 50 minutes of cleaning, the robot
will stop automatically to inform you to
change mop pads and put more water in
the water tanks.
Prevent the battery discharge by turning
off the power switch on the bottom.
①
Moisten mops thoroughly with
water and attach them to the
main unit after wringing
them out.
④
Close the rubber stopper of the water water tanks and
attach the water tanks to the bottom of the main unit.
(Pressing it while turning side to side will install it with a
click sound.)
⑤
Turn on the power switch located on the
bottom of the main unit.
(You will hear a sound, when turned on.)
⑥
Start cleaning by pushing the button
of main unit or the remote control.
②
Attach the mops centrally on
the bottom side of the water tanks.
③
Open the rubber stopper of
the water tanks and fill with water.
Components
How To Use
RS700 Main Unit
Water Tank
Microfiber Mops
Remote Control
Power Adapter
Please check before using the product!
· Please charge the product fully before the
first operation.
· When charging the battery, the button on
the main unit and the remote control don’t
work .
· Do not use any other power adapter other
than the one, which came with the unit.
Yellow LED Blinks
Low Battery Level
Blue LED Blinks
Medium Battery Level
LED is Off
Full Battery
Charging
How to Start the Wet Cleaning Mode
Right
Wrong
Right
Wrong
MTG GmbH