2
Monessen • Highland Oak Installation Instructions • 4604-908 Rev. A • 05/18
NOTE: Installation instructions are the same for 18”,
24”, and 30” log sets. Pictures used in this manual
illustrate the 24” set. Some variation may exist between
the images and the set.
INSTALL 18", 24" AND 30" (F,R) HIGHLAND
OAK LOGS ON NATURAL BLAZE BURNER
1. Place the #1 log (the “chunk”) on the grate bar right side
of the burner adjacent to the controls. Figure 1
Figure 2
LG621
place log 2
Right Front Log #2
2. Place front right log (#2) on right pin located on burner
and right grate bar. Figure 2
.
After placing front right log,
ensure log is fully upright and tilting towards the back
of the burner.
Figure 1
LG620
place log 1
Ember Chunk
Log #1
Figure 4
LG623
place log 4
Left Rear Log #4
Figure 3
LG622
place log 3
Right Rear Log #3
3. Place right rear log (#3) on pin located on rear support
bracket and rest left side of log on front right log. Figure
3
.
After placing right rear log, ensure log is fully upright
and does not tilt forward. Slide #1 log ember chunk back
to contact right rear log.
4. Place left rear log (#4) on pin located on rear support
bracket on left side and left grate bar. Figure 4
5. Place left front log (#5) on left pin located on burner and
left grate bar. Rest top right portion of log on right front
log.
Figure 5
Figure 5
LG624
place log 5
Left Front Log #5
