Monessen Hearth Systems
P/N 33D1106 Rev. 1 • January 2000
DESCRIPTION
QTY
T-Stat
1
Wires
2
Screw
1
BTSB
THERMAL SENSOR
KIT FOR BLO
BLOWER
Use this thermostat only with
DBX series fireplaces
installed with an approved blower.
CONTENTS OF KIT:
If any part or parts are missing, contact the dealer where
you bought the thermal sensor kit.
TOOLS NEEDED FOR INSTALLATION:
Short-Handled Phillips Screwdriver
Small Jeweler’s Style Screwdriver
W
ARNING
• Turn off, unplug, and let fireplace cool before installing thermal sensor.
• Only a qualified service person should service and repair fireplace.
• A qualified service person must connect and disconnect fireplace to gas supply.
• Follow all local codes.
CA
UTION
Electrical connections should only be performed by a qualified, licensed electrician.
Main power supply must be turned off before connecting fans to main electrical
power supply or performing service.
W
ARNING
Electrical Grounding Instructions:
This appliance is equipped with a three-prong (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded three-
prong receptacle.
IMPORTANT
Always check local building codes. The installation must comply with local regulations as well
as the national electric code.
