22
AVFLST Vent Free Fireplace
Monessen • AVFLST42 Installation Instructions • 4118-900 Rev. B • 05/2020
IntelliFire™ Plus ODS
Figure 4. Mounting Remote Control Housing
ng
5. Close the housing door. See Figure 4.
4. Place remote control inside housing. See Figure 3.
Figure 3. Remote in Housing
Installation of Remote Control Housing
Caution! Risk of Fire! DO NOT
install damaged or mod-
ified components. Warranty will be voided if damaged or
modified components are installed
.
Kit components
: One remote control, two #6 screws, two
wall anchors, 3 AAA batteries and one AUX300 module. If
batteries are properly installed the remote will turn on
1. Remove remote control components from packaging.
2. Remove battery cover from the back of the remote by
sliding it down and install 3 AAA batteries.
To prevent unintended operation when not using your fire-
place for an extended period of time (summer months,
vacation, trips, etc):
• Remove batteries from remote control.
• Unplug switching adapter and remove back-up batteries.
3. Secure the remote control housing on a flat wall sur-
face using the two screws and wall anchors provided.
See Figure 2.
Figure 2. Mounting Remote Control Housing
