3. The Moneris Vx810 Hardware
3.7
The Chip Card Reader
The chip card reader is located in a slot in the front of the terminal. When a chip card is inserted, the chip card
reader reads the information on the card's chip (e.g., whether to prompt for PIN or print a signature line on the
receipt).
To correctly insert the chip card into the chip card reader:
1.
Ensure that:
•
the card is facing up
AND
•
the chip is closest to chip card reader slot on the terminal.
2.
Slide the card into the chip card reader slot until the card stops sliding in.
Inserting a Chip Card in to the Chip Card Reader
IMPORTANT: Leave the chip card in the reader for the entire transaction.
3.
When the "Remove Card" prompt appears, pull the card gently out of the chip card reader.
3.8
The Integrated Printer
A thermal printer is integrated into the Moneris 810 Duet base. It prints black text on white, one-part thermal
paper.
To order additional paper rolls, see
. To load a paper roll in the printer, see
60
Moneris Vx810 Duet Operating Manual
