5
4
U S I N G T H E M E R C H A N T R E S O U R C E C E N T E R : M O N E R I S ® I P P 3 2 0 P I N PA D S E T U P G U I D E
Hardware setup
Using a USB cable
LATCH
USB
CABLE
PORT
USB CABLE CONNECTOR
LATCH
USB
CABLE
PORT
USB CABLE CONNECTOR
DownloadandinstalltheiPP320USBdriver
a.
Visit
https://esqa.moneris.com/connect/en/download/drivers/index.html
.
b.
Click on
IPP320USBdriver
, and then save the zip file to your computer.
c.
Unzip and extract the executable (.exe) file, then click on it to begin the
installation process.
d.
Continue clicking
Next
when prompted, then click on
Install
.
e.
Once the driver is installed, proceed to step 2 (
Connect the USB cable to
the iPP320 PINpad and your computer
) below.
1
LATCH
SERIAL
CABLE
PORT
3
SERIAL CABLE
CONNECTOR
PORT
POWER CABLE
CONNECTOR
PINPAD
CABLE
SERIAL CABLE
CONNECTOR
POWER
CABLE
PLUG
ESP iPP320_SUYTeng_Layout 1 13-11-12 1:02 PM Page 5
LATCH
SERIAL
CABLE
PORT
3
SERIAL CABLE
CONNECTOR
PORT
POWER CABLE
CONNECTOR
PINPAD
CABLE
SERIAL CABLE
CONNECTOR
POWER
CABLE
PLUG
ESP iPP320_SUYTeng_Layout 1 13-11-12 1:02 PM Page 5
LATCH
SERIAL
CABLE
PORT
3
SERIAL CABLE
CONNECTOR
PORT
POWER CABLE
CONNECTOR
PINPAD
CABLE
SERIAL CABLE
CONNECTOR
POWER
CABLE
PLUG
ESP iPP320_SUYTeng_Layout 1 13-11-12 1:02 PM Page 5
LATCH
SERIAL
CABLE
PORT
3
SERIAL CABLE
CONNECTOR
PORT
POWER CABLE
CONNECTOR
PINPAD
CABLE
SERIAL CABLE
CONNECTOR
POWER
CABLE
PLUG
ESP iPP320_SUYTeng_Layout 1 13-11-12 1:02 PM Page 5
Using a serial cable
INITREQUIRED
ConnecttheserialcabletotheiPP320PINpadandyourcomputer
a.
Plug the serial cable into the empty port on the
underside of the iPP320 PINpad.
b.
Fold the latch down and press to secure the cable
connection to the iPP320 PINpad.
c.
Plug the power cable connector into the port at the
back of the serial cable connector.
d.
Plug the serial cable connector into a serial port on
your computer.
e.
Plug the power cable into a working power outlet.
f.
Wait while the iPP320 PINpad powers on.
g.
When the “INIT REQUIRED” screen displays on the
iPP320 PINpad, proceed to
Configuring the iPP320
PINpad
on page 6.
1
INITREQUIRED
ConnecttheUSBcabletotheiPP320PINpadandyourcomputer
a.
Plug the USB cable into the empty port on the
underside of the iPP320 PINpad.
b.
Fold the latch down and press to secure the cable
connection to the iPP320 PINpad.
c.
Plug the USB cable connector into a USB port on
your computer.
d.
Wait while the iPP320 PINpad powers on.
e.
When the “INIT REQUIRED” screen displays
on the iPP320 PINpad, proceed to
Configuring the
iPP320 PINpad
on page 6.
2
INITREQUIRED