9
Installation and Operating Instructions Klapi
storage
Store the heater in its original package in an upright position and in a
warm and dry location until it is installed.
delivery content
The heater stones are not included in the delivery. Inspect the heater
components visually. If you notice any discrepancies or deficiencies,
please contact the store where you purchased the heater. Do not
expose heater parts to blows and denting when taking them out of the
package. The sauna’s floor surface should also be properly protected
before you begin the installation.
5. Heater assembly and installation
Before installation
1) Prior to installation, ensure that the safety distance requirements are met.
2) There should not be any electrical equipment or wires or inflammable materials within the safety
distances of the heater.
3) Please also note the safety distances of the chimney flue! If the safety distance requirements are not
met, additional protective materials must be used.
4) For more detailed instructions on fire safety provisions, please contact the fire authorities.
Preheating
Pre-heat the heater outdoors or in a well-ventilated area. The surface of the heater is painted. Some of
the paint will burn out during the first heating, which results in the heater body emitting smoke. When
no more smoke is emitted, the heater is ready for use.
If the heater is preheated outdoors, chimney pipes should be fitted to ensure a proper draught and to
burn off any protective coatings on them.
The surface treatment of the heater achieves its final strength during the first heating of the heater.
Avoid rubbing or wiping the painted surfaces of the heater before the first heating.
For the first heating, one load (about 5 kg) of wood is sufficient.
Pre-heat the heater without stones. Stack the stones into the heater only when the heater has cooled
down completely after the preheating.
always keep the firebox door closed during the preheating!
Do not throw water on the heater during the preheating. Doing so may damage the paint coating.
Observe the safety distances between the heater and any inflammable material in accordance with the
instructions (see page 7) when installing the heater.
