Monark Kickbikes
6
Fig: Handlebar adjustment
Assembly / Adjustment
Assembly
Assemble your kickbike according to the installation
instructions for your specific model, see pages 7-9.
The handlebar stem must be recessed
so that the height position mark is not
visible.
Stem
(expander bolt)
Handlebar adjustment
Handlebar assembled on a traditional stem is raised
and lowered by loosening the expander bolt on the
stem and unscrew it about 5 mm. Tap the expander
bolt using a plastic mallet to loosen the expander cone.
The handlebar can now be set to the desired position.
Tighten the expander bolt when the handlebar is in
place. See
Fig: Handlebar adjustment
.
Note! It is important that the MAX / STOP mark on
the stem is not exceeded. In addition to the security
risk, the frame can be damaged.
Max / stop mark
stem
