Monark Compact Rehab 871 E, Manual

Page: 12 / 16

Fig: Lubrication
Fig: Hub assembly
Freewheel sprocket
When replacing the freewheel sprocket remove frame
covers if necessary. Dismantle the chain as described
in part ”Chain 1/2” x 1/8” ”.
Loosen the axle nuts and lift off the flywheel. Remove
the axle nut, washer, chain adjuster and spacer on
the freewheel side. Replace sprocket-adaptor and
assemble the new parts in reverse order according to
the above.
NOTE: Do not tighten the axle nut completely. It
must be possible to loosen the adaptor-sprocket half
a turn.
The sprocket should be lubricated with a few drops of
oil once a year. Tilt the cycle to make it easier for the
oil to reach the bearing. See
fig: Lubrication.
Monark 871 E
12