Monark Cardio Care 927 E, Manual

Page: 13 / 32

Monark Cardio Care 927 E
13
Strength training:
Give yourself a thorough warm-up. 1.
Pedal with a heavy resistance for 5-10 se- 2.
conds, then rest 45-60 seconds. Repeat this
5-10 times.
It is a good idea to combine your cycle training
with gymnastics for 5 minutes, as this will give
you a physiologically well-balanced form of
training.
Elderly people and physically weak persons
should consult a doctor before starting their
training.
Trouble shooting guide
Trouble shooting guide
Symtom Probable Cause/Corrective Action
The Display is not working Check that the batteries are ok.
No heart rate
(chest belt not included, art.no: 9339-98)
Check the chest belt (battery). Wet the thumbs and place them on the elec-
trodes. A low clicking sound will appear near battery lid while you click on
the electrodes with one thumb.
Use another external HR monitor to check the belt.
Check that the chest belt is positioned correct on test person and tight
enough. Check that the electrodes are wet, in hard cases it is necessary to
use a contact gel or a mixture of water with a few drops of washing-up
liquid.
The level for HR signal can vary from person to person. Put chest belt on
another known person who has a good pulse rendering.
Uneven Heart rate Use an external unit for example a pulse watch to check if it also indicates
irregular pulse. If it is the case there are probably disturbance in the room.
Magnetic fields from high voltage cables, elevators, fluorescent tube etc can
cause the disturbance. Other electronic equipment could be placed to close.
If irregular pulse remains we recommend measuring HR manually. If HR
still remains irregular at workload test person’s health need to be examined.
There’s a click noise with every pedaling
(increases with the weight) The pedals are not tightly drawn. Change pedals.
There’s a loose in the crank cheek, loose in the base bearing.
Scratching noise is heard when pedaling Check that the carriage block is taken off and that none of the covers is
scratching.
There’s a click noise and a squeak noise
when pedaling Untighten the chain a bit.