Monarch Pathfinder Ultra Silver 6032, Quick Start Manual, Page: 7 / 13

6
6. Pull the backing paper over the guide roller, down to the pinch and feed
rollers.
7. Hold the backing paper edge between the feed and pinch rollers and press
the trigger.
8. Close the cover completely and press ESC to exit supply-loading mode.
Loading for Non-Peel Mode
1. Feed the supply under the applicator roller and over the label deflector.
2. Close the supply cover.
3. Press ESC to exit supply-loading mode.
R e m o v i n g S u p p l i e s i n P e e l M o d e
♦
Tear the backing paper just above the pinch roller.
♦
Open the supply cover completely.
♦
Spread the supply holder tabs apart and remove the supply roll.
♦
Carefully pull out the supply backing paper still in place between the pinch
and feed rollers.
Feed Roller
(behind
Pinch Roller)
Pinch Roller
Guide Roller
(behind supply)
Applicator
Label
Deflector