4-18
System Administrator’s Guide
C o n f i g u r i n g N e t w o r k P r o t o c o l s
Only configure the settings required for your network/printer. To enable or
disable protocols:
1.
From the side menu, click
Admin
. The Web Admin Configuration screen
appears.
2.
Click
Protocol Control
.
3.
Enable or disable your network protocols and IP protocols.
Note
: If you disable the TCP/IP protocol, all IP protocols are disabled
automatically.
4.
Click
Submit
.
5.
Click the reset link at the bottom of the screen. The Reset Server screen
appears.
6.
Click
Submit
and wait five seconds for the print server to reset. Even
though you submitted your changes, they do not take effect until you
reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
C o n t r o l l i n g I P A c c e s s
You can limit which remote hosts are able to access the printer by setting up
an IP address range.
Summary of Contents for Monarch 9433 SNP
Page 10: ...1 4 System Administrator s Guide...
Page 34: ...3 8 System Administrator s Guide...
Page 62: ...4 28 System Administrator s Guide...
