background image

In  order  to  comply  with  EU  Directive  2012/19/EU  on  Waste    Electrical 

and  Electronic  Equipment  (WEEE):

 This product may contain material 

which could be hazardous to human health and the environment. DO NOT  

DISPOSE of this product as unsorted municipal waste. This product needs to be 

RECYCLED in accordance with local regulations; contact your local authorities for 

more information. This product may be returnable to your distributor for recycling; 

contact the  distributor for details.

SAFEGUARDS AND PRECAUTIONS

Laser Hazards

Eye injury from beam

 - Do not look into the direct or reflected beam; can cause eye 

injury up to 25 ft [7.5 m] away.

Visual interference (glare) with pilots and drivers

 - Interferes with vision up to 525 

ft [160 m] away. Can be a distraction up to 1 mile [1.6 km] away. 

NEVER point any 

laser towards aircraft or vehicles; it is unsafe and illegal.

Read  and  follow  all  instructions  in  this  manual  carefully,  and  retain  this 

manual for future reference.

Do  not  use  this  instrument  in  any  manner  inconsistent  with  these  operating   

instructions or under any conditions that exceed the environmental specifications 

stated.

This instrument is not user serviceable. For technical assistance, contact the sales 

organization from which you purchased the product.

Diode Laser

Max. Output Power: 

<1 milliwatt

Wavelength: 

650 nanometers (visible light)

Beam Divergence: 

 <18 milliradian

Output:  

Continuous (CW)

Laser Hazard Classification:  

Class 2

Safe Use Guidance:

Class 2 lasers are considered safe 

for accidental eye exposure. Do 

not look or stare into beam. Do 

not aim at aircraft. 

This is not a 

toy.

 Always supervise children.

Manufacturer:

Monarch Instrument

15 Columbia Drive

Amherst, NH 03031 USA

Country of Origin: USA

Contact info: 

www.monarchinstrument.com

Summary of Contents for PLT200





























Reviews: