8
4.1.2 Touch Keypad Entry
Press the MENU button to display the numeric keypad. The flash
rate will default to 0 and show the units you are entering. Note
that this is a capacitive touch sensitive keypad and will not respond
if the user is wearing gloves.
To confirm that the strobe is flashing at the same rate as the target
is moving and that the RPM/RPS reading is accurate, use the
x
2
button until you see a double or multiple image, then use the ÷2
button until you see a single image. This will now be the correct
speeds. (See Figure 5 on the next page.)
4.1.3 Doubling or Halving the Flash Rate
Press the MENU button twice to display the times 2 (
x
2) and divide
by 2 (÷ 2) icons. Press the POWER button to exit this mode.
Press the MENU
button twice.
Use the joystick or touch
icons on display to x2 or ÷2.
Press the MENU button.
Enter the desired flash rate
and press the enter key .
MENU button
POWER button
On-Target Indicator
Joystick Arrows