11
@CH_A/LOEND = 12
(or 1_SEC, HALF)
Sets low end time; allows a minimum
reading of 5 RPM, 60 RPM, or 120 RPM
@CH_A/GATE
Show Gate Speed (default is 12)
@CH_A/GATE = STD
(1/100 Second) or
FAST (1/1000 second)
Sets Gate Speed (default is 1/100)
@DECPT
Shows the number of decimal places
displayed
@DECPT = NONE,
1, 2, or 3
Sets the maximum number of decimal
places
@DAC1/ FSCAL
Shows Analog Out Full Scale
@DAC1/FSCAL = xxx.xx
Sets the Reading value that the Analog
output will output Full Scale (5 V or 20
mA); depends on TYPE
@DAC1/0SCAL
Shows Analog Out Zero Scale
@DAC1/0SCAL = xxx.xx
Sets the Reading value that the Analog
output will output Zero Scale (0 V or 4
mA); depends on TYPE( default is 0.00)
@DISPR
Shows Display Update Rate
@DISPR = HALF or
1_SEC or 1.5_S.
Sets the maximum display update rate
to one half a second, 1 second or 1 ½
seconds between updates
@SERNO
Shows unit serial number
