12
flash rate. If the adjustment was in time, the strobe will have a fixed
duration irrespective of the flash rate.
This is a live adjustment—if the trigger is depressed, the effect of
changing the brightness can be seen immediately.
5.3.1
Degrees
Press the MENU button to enter the BRITE menu. The current flash
duration will be shown in degrees.
Use the arrows on the joystick to adjust the flash duration
in degrees - refer to
. Degrees can be set from 0.1°
to 14°.
Press the MENU button followed by the POWER button to save the
degree setting.
5.3.2
Time
To set the flash duration in time instead of degrees, press the MENU
button again (skip the DEG menu).
Use the arrows on the joystick to adjust to the time value. Time can
be set from 0.001 msec to 2.000 msec.
Press the MENU button followed by the POWER button to save the
time setting.
5.4 DECPT (Decimal Point) Menu
The Decimal Point menu adjusts the resolution of the flash/tach rate
displayed. Up to three places after the decimal point can be shown.
The number of decimal places is limited by the 6-digits available and
the unit will auto range to show the maximum number of digits after
the decimal point selected by the user. The choices are NONE, 1, 2, 3.
MENU button POWER button On-Target indicator Joystick arrows
MENU button POWER button On-Target indicator Joystick arrows
