8
LCD Instructions
1 M i c P o s i t i o n i n g
2 S e t
P r e s e t
3 G o P r e s e t
4 P r o t o c o l
S e t t i n g
5 V i d e o J u m p M o d e
6 G a i n S e t t i n g
7 R e s e t
S e t t i n g s
1. Set microphone position (for image auto-track).
2. Set high-speed dome camera preset points.
3. Check the preset points above.
4. Set conference main controller type (input) and camera brand (output).
5. Set main output.
6. Adjust Gain values on each input screen.
7. Restore factorysettings.
Note: All figures shown on this manual is only for examples. Each main control unit has
been through a series of QC test before leaving factory. Default values are not identical,
users can change settings simply followed by the instructions below.
○
,
1
