All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
may be reproduced in any form or by any means for any commercial use.
English
10
language of the web server or to install the
latest firmware.
To reset the amplifier to its factory settings,
keep the pushbutton RST (4) pressed for at
least 5 seconds.
5.2 Connection to a WLAN router
With the WPS function (WiFi Protected
Setup), the AKB-90WIFI can be easily con-
nected to a WLAN router provided that the
router supports WPS: Briefly press the push-
button RST (4). The AKB-90WIFI will auto-
matically transfer the data required to a
WLAN router in the reception range.
As an alternative, use the web user inter-
face of the AKB-90WIFI to connect it manu-
ally to a router, e. g. when WPS is not sup-
ported by the router.
6 Specifications
Amplifier
RMS output power: . . . 2 × 45 W at 4 Ω
Amplifier class: . . . . . . . class D
Speaker impedance: . . 4 Ω min.
Frequency range: . . . . . 20 – 20 000 Hz
S / N ratio: . . . . . . . . . . . > 98 dB
Data transmission
WLAN standard: . . . . . . 802.11 B / G / N,
2.4 GHz
Range: . . . . . . . . . . . . . approx. 110 m with-
out obstacles in the
transmission path
Supported
audio formats: . . . . . . . MP3, WMA, AAC,
AAC+, ALAC,
FLAC, APE, WAV
Network protocols: . . . . TCP/ IP, UDP,
HTTP, UPNP
Audio protocols: . . . . . . DLNA, AirPlay,
QPlay
SSID: . . . . . . . . . . . . . . WiFi-HiFi_xxxx
IP address: . . . . . . . . . . 10.10.10.254
General
Power supply: . . . . . . . 19 V
,
via power supply
unit provided and
connected to
230 V~ / 50 Hz
Power consumption
in standby mode: . . . . . 200 mA
Ambient temperature: . 0 – 40 °C
Dimensions: . . . . . . . . . 170 × 34 × 100 mm
Weight: . . . . . . . . . . . . . 750 g
Subject to technical modification.
