18
English
5.2 Audio player
The integrated audio player can reproduce audio
files in the MP3 or WAV format . USB flash drives
or SD[HC] memory cards (also MMC cards) can
be used as storage media .
Note:
Due to the large number of storage device manu-
facturers and device drivers, it cannot be guaranteed that
all storage media are compatible with the audio player .
Insert a USB flash drive into the USB port (1)
and /or insert a memory card (contacts facing
upwards) into the slot (2) .
When the unit is switched on, the audio file
most recently replayed will be selected and the
audio player will be in the pause mode (indi-
cation:
) . The USB flash drive will take
priority over the memory card . When a storage
medium is inserted during operation, it will be
automatically selected .
The audio player can be operated via the but-
tons (4) or the remote control provided (fig . 4)
(
☞
chapter 5 .4) . Point the remote control to the
infrared sensor on the right of the display (3) .
The display indicates the time played of the
current title . The volume of the replay depends
on the settings of the audio player and the con-
trol PLAYER (11) .
5.3 Bluetooth receiver
As an alternative to the reproduction from a
USB flash drive or a memory card, the integrat-
ed Bluetooth receiver can be used for wireless
connection to a Bluetooth audio source (e . g .
smartphone or tablet computer) .
1) When no USB flash drive and no memory
card is connected, the PAS-254D will be auto-
matically in the Bluetooth mode: The display
(3) will show
.
When a storage medium is connected,
press the button
M
repeatedly until neither
TF
nor
USB
lights up on the left of the display . The
display will show
after a few seconds .
2) Activate the Bluetooth function at the
Bluetooth source . PAS-254D (designated
as “BT-SPEAKER”) will appear in the list of
available units .
3) Pair the source with “BT-SPEAKER” (if re-
quired, see the instruction manual of the
Bluetooth source) . The two units will then
be automatically connected .
Once the connection has been estab-
lished, a two-tone sequence will sound .
The replay via the Bluetooth receiver can be con-
trolled by means of the buttons (4) or the remote
control provided (fig . 4) (
☞
chapter 5 .4) . Point
the remote control to the infrared sensor on the
right of the display (3) .
The volume of the Bluetooth replay de-
pends on the settings of the Bluetooth source,
the audio player / Bluetooth receiver and the
control PLAYER (11) .
When neither the audio player nor the
Bluetooth receiver are used, switch them off by
means of the remote control (button ) . This
will increase the operating time of the battery
and prevent any undesired Bluetooth reception .
8
9
7
5
6
4
2
3
1
0
EQ
+
−
U/SD
SCAN
Mode
➍
Remote control
