TRANSEND E+ DUAL MOUNTING KIT
Specifications
Material: aluminum
Color: Matt black
Weight: 124g
Package Contents
Front Fender hardware:
(F-a) 2 x M5*21 bolts
Rear Fender hardware:
1 x U stay
(R-a) 2 x M5*8 bolts
(R-b) 1 x M5 clip set
(R-c) 1 x hanger part (h=17mm)
(R-d) 2 x M5*21 bolts
Installation
1. Ensure the bike is switched off with kickstand engaged and is on level
ground.
2. Remove any accessories that may interfere with the installation and/or
use of the rack and fender set
3. This Dual Mounting kit is the hardware set when you assemble the rack
and fender set together.
Usage information
- Check if the rack and fender set are firmly mounted before every ride.
- Regulary check the state of the rack and fender set and mounting parts
for any signs of looseness, deterioration, corrosion or other damage.
LIMITED PRODUCT WARRANTY INFORMATION
Giant Global Inc. warrants its products for a period of one (1) year from
the date of purchase, this applies only for the original owner. This warranty
applies only to this product when purchased new from an Authorized Giant
Dealer and assembled by that dealer at the time of purchase.
LIMITED REMEDY
Unless otherwise provided, the sole remedy under the above warranty, or
any implied warranty, is limited to the replacement of defective parts with
those of equal or greater value at the sole discretion of Giant Global Inc.
This warranty extends from the date of purchase, applies only to the
original owner, and is not transferable. In no event shall Giant Global Inc.
be responsible for any direct, incidental or consequential damages,
including, without limitation, damages for personal injury, property
damage, or economic losses, whether based on contract, warranty,
negligence, product liability, or any other theory.
EXCLUSIONS
The above warranty, or any implied warranty, does not cover:
• Normal wear and tear on parts in situations where there are no
assembly or material defects.
• Products serviced by other than an Authorized Giant dealer.
• Modifications of the product from its original condition.
• Use of this product for abnormal, competition and/or commercial
activities or for purposes other than those for which this product was
designed.
• Damage caused by failing to follow the User's Manual.
• Paint, finish and decal damage resulting from taking part in competi-
tions, jumping, downhill and/or training for such activities or events or as
a result of exposing the product to, or operating the product in, severe
conditions or climates.
• Labor charges for part replacement or changeover.
Except as is provided by this warranty and subject to all additional
warranties, Giant Global Inc. and its employees and agents shall not be
liable for any loss or damage whatsoever (including incidental and
consequential loss or damage caused by negligence or default) arising
from or concerning any Giant Global Inc. product.
Giant Global Inc. makes no other warranties, express or implied. All
implied warranties, including the warranties of merchantability and fitness
for a particular purpose are limited in duration to that of the express
warranties stated above.
Any claim against this warranty must be made through an Authorized
Giant Dealer or distributor. The purchase receipt or other proof of the date
of purchase is required before a warranty claim may be processed. Claims
made outside the country of purchase may be subject to fees and
additional restrictions. Warranty duration and details may differ by country.
This warranty gives you specific legal rights, and you may also have other
rights which may vary from place to place. THIS WARRANTY DOES NOT
AFFECT YOUR STATUTORY RIGHTS.
Disclaimer
To ensure safety, quality and reliability, use only original parts or Giant
authorized replacements for repair and replacement. Giant is not
responsible for any direct, incidental or consequential damages, including,
without limitation, damages for personal injury, property damage, or
economic losses due to improper use.
Warning
- Read all information in this manual carefully before you start using the
rack and fender set. Safety instructions are very important and should
not be overlooked. By reading the manual you will have a better
understanding of the general operation.
- Only use the rack and fender set with supplied installation hardware.
- Do not modify the rack and fender set in any way.
- Periodically check all bolts are tight as vibrations may loosen them over
time.
- Do not use the rack and fender set to move or lift the bike.
- If you are not confident with compatibility and installation of this product,
please consult your local authorized dealer.
- Regulation can vary by country, and/or location, always check in
advance.
Front fender:
4. Both sides of front fork: Use a 4mm hex torque wrench to tighten two
M5*21 bolts with 5-8Nm.
Rear fender:
5. Assemble U stay with rear fender with two M5*8 bolts and one M5 clip
set with Phillips screwdriver. Don't tighten completely at this time.
6. Rear end of seat stay: use a 4mm hex torque wrench to tighten two
M5*21 bolts.
7. Assemble the hanger part with the slider block of rear fender with 4mm
hex torque wrench.
8. Adjust the rear fender to appropriate height and tighten the bolts with
5-8Nm.
9. Double check if the rack and fender set are properly installed. The rack
and fender set should not move or rotate in any direction.
