17
-
Mount the doorbell onto the bracket and screw in the
bottom security screw, then reapply the color case to
the Knok.
Step 12: Restore power to the installation site.
-
The lights will come on and you will hear a
confirmation as your Knok starts up.
Step 13: Pair the Knok
Note: Your Knok should already be installed and powered
on before pairing.
To begin using your Knok, you will first need to pair it to
your Momentum account and then connect it to your Wi-Fi
network.
-
Once your Knok has been powered on the first time,
it should already be put into pairing mode. The lights
should be double-blinking blue.
-
If it’s not in pairing mode, you will need to detach the
doorbell from the mounting bracket and hold down
the reset button behind the doorbell 10 seconds.
