Status
Light
Solid red light on
The camera is turning on or
malfunctional
Blinking red light
Awaiting WiFi connection
Solid blue light on
Camera running correctly
Microphone
Captures sound from the monitoring place
SD Card Slot
Supports local SD card storage (Max. 128G)
Reset
Press and hold for 5 seconds to reset the camera
(camera setting return to factory defaults)
Full-duplex Audio :
•
When the visitor presses the doorbell button, you will get a call. You can
see and hear the visitor in MOMAX Smart APP from the doorbell if you
answer.
Motion Detection :
•
Built-in motion sensors detect movement, and the doorbell will send you
a push notification and app alert.
Shared device :
•
The doorbell device can be shared with friends and family. They can
also preview online. There is no limit to the number of sharing devices,
but only 6 accounts are supported for online preview at the same time.
Record :
•
Support 24H continuous recording with high capacity SD storage or
Cloud storage. (Requires in-app setting)
Night-vision :
•
Able to auto switch to night vision, maintain normal operation even in
dark environment.
Wireless Ring Chime (Optional) :
•
Connect the Wireless ring chime to a USB port, then go to Setting in
Device page, find Bell Settings and change the Chime Type to Digital.
•
Short press the reset button at the back of the Chime.
•
Press Bell Settings and then press the bind button.
•
You can set the ringtone or the volume for the Chime in this setting page.
Function
6
7
SL3S_manual_OP.indd 6-7
SL3S_manual_OP.indd 6-7
1/4/2022 ��10:08
1/4/2022 ��10:08
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential Installation.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users and installers must
be provide with antenna installation instructions and consider removing the nocollocation
statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution!
Aay changes or modification not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.