Momax AIRY 360, Instruction Manual, Page: 7 / 29

Discharge Function :
When the battery voltage is too low,the fan will stop working,and the
digital panel displays 10% 3s and then power off, at this time,it needs to
be charged before use or charge while working,when the battery is full,the
charging will stop automatically, the digital display shows FU%.
1. Charging indication during shutdown
The digital panel display current battery capacity in % while charging,
then enter into display FU% while full charged,when turn on the unit,
the display transfer into operation states.the display light will off when
remove the adapter.
2. No charge indication when power on
When fan is working, long press the on/off button 3 seconds, the digital
panel transfer to display battery state in% ,5s later back to display
current wind leve; when capacity lower than 20%,the capacity signal
will flash for 3 seconds and back.when lower than 10%, the display
flash 3 second and the unit turns off.
3. Charging indication when fan on
Charging when fan is on, the digital window will display current battery
state in%, 3 seconds later will back to wind level display; also you can
long press on/off button 3 seconds to display battery state in%; when
full charged will display FU%, the digital window will display current
wind level when remove the adapter.
1. Remove the battery protective film before operating.
2. Operate the remote when pointing to the device.
3.
Battery replacement: when the remote control decreases the
operating range or the main body does not response, please replace
the battery.
4. Always follow correct polarity when replacing battery as shown above
5. Keep button cell batteries away from Children.
Operating Instructions Of Remote Control
+
+
CR2025
CR2025
10 11