Moller Medical Docon Seal, Instructions For Use Manual

Page: 31 / 68

Docon SealM
Docon Seal
Setup and commissioning
Page 31 of 68
4.4.1 Connecting and commissioning the Docon Seal
1. Set up the device in the desired position with the base facing
downwards.
2. Connect the power cable on the back of the housing to the Do-
con Seal power socket.
3. Insert the power cable into a socket.
4. Turn on the Docon Seal by pressing the on/off button.
5. The LED of the on/off switch lights green.
Further steps as described in Chapters 4.3.2 to 4.3.4.
4.5 Overview of button signal statuses
Status
Colour
LED
Ready for operation Green Lit
Remaining capacity of battery 10-
30%
(Docon SealM only)
Green Flashing
Residual capacity of battery <10%
(Docon SealM only)
Orange Flashing
Error status or BATTERY empty Orange Lit
Charging
(Docon SealM only)
Orange Flashing
Charging complete
(battery fully charged)
(Docon SealM only)
Green Lit