background image

Molift Air / www.etac.com 

1

Important

This User Manual contains important safety instructions and 
information regarding the use of the sling and accessories. 
In this manual the client is the person being lifted. 
The caregiver is the person operating the lifter.

This symbol indicates important information 
related to safety. Follow these instructions 
carefully.

Read User Manual before use!  
It is important to fully understand the con-
tent of the user manual before attempting to 
use the equipment.

Visit www.etac.com for download of documentation to ensure 
you have the latest version.

Molift Air 200/350

1

2

3

7

8

6

5

4

Hoist components:

1.  Trolley
2.  Hoist
3.  Side covers
4.  Emergency stop/ Emergency 

lowering

5.  Lifting belt
6.  Quick release pin
7.  Hand control
8.  Sling bar

About Molift Air

Molift AIR is a strong and smooth ceiling lift that enables patients 
and residences to be transferred in a comfortable and safe way. 
Suitable for sitting and lateral transfers as well as standing and 
gait training situations together with the comprehensive acces-
sory program from Molift.
Molift AIR is a very light motor which in combination with the 
quick release coupling system gives an easy handling when 
mounting and servicing

General

Declaration of conformity:

The Molift Air and related accessories described 
in this operator manual are CE marked in 
accordance with EU Council Directive 93/42/EEC 
concerning medical devices, class 1, and has been 
tested and approved by a third party according to 
standards IEC 60601-1, IEC 60601-1-2 and NS-EN 
ISO 10535:2006.

Conditions for Use

Lift and transfer of a client will always pose a certain risk and 
only trained personnel are allowed to use the equipment and 
accessories covered by this user manual. The rail system must 
be installed by certified personnel in accordance with applicable 
installation instructions.

Modifications and use of components made by other manufacturers.

We recommend only using Molift components and spare parts. 
Declaration of conformity is not valid and Etac is not responsible 
for warranty if any modifications are made to the product. Etac 
shall not be liable for faults or accidents that can occur when 
using components made by other manufacturers.

The lifter is not intended to be operated by the client being lifted. 
If a hoist is to be used by a client living on their own, then some 
form of communication device shall be installed in the area of use 
of the hoist so that in the event of an emergency the client is able 
to summon assistance. This may, for example, be the fitting of an 
alarm system or the supply of a conveniently placed telephone, 
etc.

Only certified personnel are allowed to open 
hoist or accessories to perform service or 
repair. Risk of injury from rotating parts and 
electric shock.

Warranty: 

2-year warranty against defects in 

workmanship and materials of our products. 1 
year warranty for battery.
For Terms and conditions, see www.etac.com

Summary of Contents for Air 200










Reviews: