One Product Features:
·
Main board adopts Philips CPU and microcomputer chip-level.
·
TDG anti-theft cylinder(easy to replace of anti-theft mechanical cylinder)
·
Modern and fashion style
·
Optional unlocking modes(Password or card, password only, card only, card+password)
·
When illegal attack happened lock password to protect and give a alarm.
·
Can manage cards by passwords
·
With function of anti-peeped passwords.
·
TDG anti-theft cylinder can replace of normal standard anti-theft door lock cylinder.
Two Technology Specification
More than 300,000 times
Available cards
RF card
Cards testing method
Microwave test, reliable and advanced
Password numbers
200 groups
Card numbers
780 pcs
Power supplier
DC4.5V
～
6.5V, 4pcs 1.5V“AA” alkaline batteries
Static current
< 15
μ
A
Dynamic current
< 150mA
Low voltage warning function
Have sound lighting notice when voltage low
than 4.8V,, still can open 50 times.
Electric actuator
DC micro motor
Available cylinder
Standard anti-theft door use TDG electronic
cylinder
Service life
Three Function and Operation
Product Original Status
Initial user password is "123456".
Initial management passwords is “0000” (Management passwords cannot unlock the lock).
1
2
1). Change the management passwords.
“*7” + management pas # + new management pas #. Setting finished.
Remarks: New management passwords will replace the old one.
Atten.: The correct operation of “*7”
：
Use one finger press *, then another finger press 7,
then release both buttons at the same time. Same operation for “*8”, “*9”, “*0”, “*1”.
2). Change the management card.
“*7” + management pas # + new management card + #. Setting finished.
Remarks: New management card will replace the old one.
We named “Read management card” or “Input management passwords” to “management
key” in the following instructions.
3). Add new user cards or new user passwords.
Add new user cards: “*8” + management key + # + new card + #.
Repeat for more user cards.
Add new user passwords: “*8” + management key + # + new pas #.
Repeat for more user passwords.
The function can input many user cards continuously, or input many user passwords;
The function will exit automatically after 6 seconds, or you can press “#” to exit operation
directly.
4). Delete user cards or user passwords.
Delete user cards: “*9” + management key + # + user card + #.
Repeat to delete more user cards.
Delete user passwords: “*9” + management key + # + user pas #.
Repeat to delete more user passwords.
The function can delete many user cards continuously, or delete many user passwords;
The function will exit automatically after 6 seconds, or you can press “#” to exit
operation directly.
5). Delete function
a. Factory reset: “*0” + management key + # + 0 + 0 + #.
b. Delete all user passwords and user cards: “*0” + management key + # + 0 + 1 + #.
c. Delete all user cards: “*0” + management key + # + 0 + 2 + #.
d. Delete all user passwords: “*0” + management key + # + 0 + 3 + #.
