Distributor of Molex Connector Corporation: Excellent Integrated System Limited
Datasheet of 0638238000 - HANDTOOL CRIMP 2.5MM WW 22-28AWG
Contact us: [email protected] Website: www.integrated-circuit.com
Hand Crimp Tool for 2.5mm (.098") Pitch Wire to Wire Crimp Terminals
Doc No: ATS-6382380HM
Release Date: 02-15-11
UNCONTROLLED COPY
Page 4 of 6
Revision: C
Revision Date: 03-27-14
INCORRECT
Figure 5
CORRECT
INCORRECT
Maintenance
It is recommended that each operator of the tool be made
aware of, and responsible for, the following maintenance
steps:
1.
Remove dust, moisture, and other contaminants with a
clean brush, or soft, lint free cloth.
2.
Do not use any abrasive materials that could damage the
tool.
3.
Make certain all pins; pivot points and bearing surfaces
are protected with a thin coat of high quality machine oil. Do not oil excessively. The tool was engineered for
durability but like any other equipment it needs cleaning and lubrication for a maximum service life of trouble
free crimping. Light oil (such as 30 weight automotive oil) used at the oil points, every 5,000 crimps or 3
months, will significantly enhance the tool life.
4.
Wipe excess oil from hand tool, particularly from crimping area. Oil transferred from the crimping area onto
certain terminations may affect the electrical characteristics of an application.
5.
When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping dies,
and store the tool in a clean, dry area.
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position,
Do Not
force the handles
open or
closed
. The tool will open easily by lifting the ratchet release lever. See Figure 9.
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
CAUTION:
Repetitive use of this tool should be avoided.
CAUTIONS:
1.
Manually powered hand tools are intended for low volume or field repair. This tool is
NOT
intended for
production use. Repetitive use of this tool should be avoided.
2.
Insulated rubber handles are not protection against electrical shock.
3.
Wear eye protection at all times.
4.
Use only the Molex terminals specified for crimping with this tool.
Notes:
1.
This tool should only be used for the terminals and wire gauges specified on this sheet.
2.
This tool is not adjustable for crimp height; however crimp force is adjustable (See instructions above).
Variations in tools, terminals, wire stranding, and insulation types may affect crimp height.
3.
This tool is intended for standard conductor sizes. It may not give a good insulation crimp support for all
insulation sizes.
4.
Molex does not repair hand tools (see warranty above). The replacement parts listed are the only parts
available for repair. If the handles or crimp tooling is damaged or worn, a new tool must be purchased.
5 / 7
5 / 7
