15
Remove assignment from tool)
identification of an unknown tool - by placing a smartphone to the counter installed
in an unknown tool, you can easily identify this tool (press: Proximity Reading
(NFC))
reading Tool Cards used to get acquainted with detailed technical data of a given
tool (press: Proximity Reading (NFC) -> Tool Card))
read and write Service Cards - you can view and add new entries to the service
card register for, among others, to confirm technical inspections or proceed with
typical tools maintenance (Press: Proximity Reading (NFC) -> Service Cards)
providing access for toolmakers or subcontractors - functionality used to transfer
tools between companies. There are 2 possible cases:
transferring the tool to the subcontractor - the subcontractor confirms the
acceptance of the tool for its stock and obtains "read only" access to all
parameters of the tool. The owner of the tool may oblige the subcontractor to
read the counter's status regularly, thus obtaining the possibility of remote
control of the tool's operation, information about the number of injections made,
unexpected tool stops and is notified when the counter is disassembled from the
tool. (press: Proximity Reading (NFC) -> Other -> Share Tool))
transferring the tool to the toolmaker - the tool shop confirms the acceptance of
the tool for its stock and obtains "Full" access to read and write all parameters,
for eg. Service Cards entries, Tool Card entries, etc. The owner gets information
about the activities performed on the tool. (press: Proximity Reading (NFC) ->
Other -> Share Tool)
changing the orientation of the LCD display - you can easily rotate the counter
display upside down when the counter is mounted in the reversed position. (press:
Proximity Reading (NFC) -> Other -> Rotate LCD)
reading a tool basic tag - contains, value on the counter, owner's name, tool name,
part name, temperature, MAC address.
Configuration and proximity reading via the NFC communication interface.