5.13 Password Security
Every machine leaves our factory with two levels of password protection,
and these passwords are provided on a detachable page at the front of
the manual. We recommend that you change these passwords as soon as
possible to establish your own security.
Some functions of the touchscreen controller are protected by password
access. A prompt in the message window at the bottom of the screen
indicates whether the particular function requires a User or a System
password.
5.13.1 Edit the System Password
1. Choose [
Menu
] and open the Utils page.
2. Choose [
Edit System Password
].
3. Choose [
Set
].
4. Enter the existing System password.
5. Enter the new System password.
6.
Re-enter the new System password to confirm it.
7. Choose [
Back
] to return to the Main page.
5.13.2 Edit the User Password
1. Choose [
Menu
] and open the Utilities screen.
2. Choose [
Edit User Password
].
3. Choose [
Set
].
4. Enter the existing System password.
5. Enter the new User password.
6.
Re-enter the new User password to confirm it.
7. Choose [
Back
] to return to the Main page.
5.13.3 Set the Password Timer
1. Choose [
Menu
] and open the Utils page.
2. Choose [
Password Timer
].
3. Choose [
Set
].
If required, type in the System password at the next prompt.
4. Type in the required password active time, in minutes, and then press
[
Ent
].
5. Choose [
Back
] to return to the Main page.
5.13.4 Password Override
To override the user and System password control, set the password timer to
99. This setting eliminates the need to enter a password at any of the usual
checkpoints such as Load Tool or Temperature Change.
The only function that will still require a password input is the Change
Password action.
5-20
M1 Plus Controller User Manual
SETUP
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
