14.4.2 Horizontal Position Adjustment
The heavy duty stand linear rail / ball guide assembly is used to move the
E-Multi adapter plate position toward or away from the mold, to aid installation
and removal from the mold.
- EM3 stand range of horizontal position adjustment is 0-125 mm (0-4.92 in.)
- EM4 stand range of horizontal position adjustment is 0-30 mm (0-1.18 in.)
1
2
1. Linear rail
2. Ball guides
Figure 14-7 Heavy duty stand horizontal position adjustment
14.4.3 Front or Back Leg Position
WARNING
In either orientation, the stabilizing leg must be in contact with the floor to
prevent the assembly tipping.
The stand can be placed with the lead leg of the base frame under the front
or the rear of the E-Multi injection unit. The most stable configuration is with
the lead leg under the front of the E-Multi injection unit, but it can be reversed
if the injection molding machine set up does not have enough space for the
lead leg to be forward.
Figure 14-8 Heavy duty stand - front or back leg position
EM4 model with back positioned
over lead leg of base frame
EM3 model with front positioned
over lead leg of base frame
(Preferred Orientation)
Top view
2
1
4
3
1. Lead leg
2. Stabilizing leg
3. Lead leg of base frame
4. Stabilizing leg
14-5
E-MULTI STANDS
E-Multi User Manual
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
