8
®
Figure 5: The Charging Port in right hand side of the Back Panel of the
Trueprep AUTO v2
7.1.4 Connect the other end of the AC Adapter to a mains socket.
7.1.5 Switch On the mains power.
®
®
7.1.6 You can now proceed to use the
Trueprep AUTO v2
using the mains power. If the
Trueprep
AUTO v2
is being charged, the charging LED Indicator will glow blue. Charging takes ~3-4
hours (overnight). When charging is complete, the charging LED Indicator will go off. When this
happens, please disconnect the AC Adapter unless it is being used to power the device.
Figure 6: The Blue Charging LED Indicator Glowing
7.2
Plugging in the Reagent Bottle Pack of 25 T or Reagent Pack of 50T
7.2.1 Plugging in the Reagent Bottle Pack of 25 T packsize:
®
1. Before starting a run for the first time, plug in the colour coded reagent bottles from the
Trueprep
AUTO
Sample Prep Kit Reagent Pack into the back panel of the device, matching the colour of
the cap on the panel with the colour of the reagent bottle cap in the kit using provided Plug-in
connector with coloured caps (Figure 7). Discard the reagent bottle cap once the bottle is
plugged in.
2. Ensure that the tubing is fully immersed in the liquid upto the bottom of the reagent bottle.
®
®
Trueprep
AUTO
v2
