2019/11/2
ShowDoc
http://doc.mokotechnology.com/index.php?s=/page/5
4/8
Step2:
1. Install your wall switch and connect to the power supply.
2. Press and hold （ about 10 seconds）any switch to factory reset the wall switch
，the SW1 blink blue once then blink red rapidly.
3. Click or
go to Select Device Type page then click
Wall Switch go to Add Device page.
Step3:
1. If your wall switch not blink red light then Click
and
follow the operation steps to make the indicator blink red light.
2. When the indicator blink red light rapidly then click the
3. When prompted Connect to device’s hotspot then click Confirm button.