Note:
Only one
Bluetooth
audio player or phone
may connect to the AquaBass at a time. If you
have a problem connecting, check that no other
previously paired devices are reconnecting
automatically. To re-scan simply turn AquaBass
power off, wait five seconds and turn power back on.
Connecting a
Bluetooth
device for the first time
To pair and connect
1.
Place the AquaBass and your
Bluetooth
device
within one metre of each other.
2.
On your device, turn ON
Bluetooth
and scan
3.
On the AquaBass press and hold the power
( ) button for 1-2 seconds until you hear the
start-up chime beep and see the LED quickly
flash red / blue, indicating AquaBass is
searching for a
Bluetooth
device to connect with.
4.
After a few seconds “AquaBass” should appear
listed under available devices. Select it to connect.
OPERATING INSTRUCTIONS
Bluetooth
and associated call functions will only operate
when there is no cable connected to the 3.5 mm AUX-IN
socket of the AquaBass. Before taking the AquaBass
into wet or dusty environments ensure the port cover is
securely closed to prevent internal damage.
Pair and play via
Bluetooth
