9
TO OPERATE THE BLOWER
See Fig. 7
-
While working, always hold the blower by the grip
area(s).
-
To keep from scattering debris, blow around the
outer edges of a debris pile. Never blow directly
into the center of a pile.
-
To reduce sound levels, limit the number of pieces
of equipment used at any one time.
-
Use rakes and brooms to loosen debris before
blowing. In dusty conditions, slightly dampen
surfaces if water is available.
-
Conserve water by using power blowers instead of
hoses for many lawn and garden applications,
including areas such as gutters, screens, patios,
grills, porches, and gardens.
-
Watch out for children, pets, open windows, or
freshly washed cars, and blow debris safely away.
-
After using blowers or other equipment, clean up!
Dispose of debris properly.
MAINTENANCE
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or
performing any maintenance.
SERVICE
Preventive
maintenance
performed
by
unauthorized
personnel may result in misplacing of internal wires
and components which could cause serious hazard.
We recommend that all tool service be performed by
a MOKENEYE Factory Service Center or Authorized
MOKENEYE Service Station.
GENERAL MAINTENANCE
When servicing, use only identical
replacement parts. Use of any
other parts could create a hazard or cause product
damage.
NOTICE: Periodically inspect the entire product for
damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners
and caps and do not operate this product until all
missing or damaged parts are replaced. Please
contact customer service or an authorized service
center for assistance.
CLEANING
The tool may be cleaned most
effectively with compressed dry air.
Always wear safety goggles when cleaning tools
with compressed air. Ventilation openings and
switch levers must be kept clean and free of foreign
matter. Do not attempt to clean by inserting pointed
objects through openings.
Certain cleaning agents and
solvents damage plastic parts.
Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and house
hold detergents that contain ammonia.
STORAGE
Store the tool indoors in a place that is inaccessible
to children. Keep away from corrosive agents.
TROUBLE SHOOTING
PROBLEM: TOOL DOES NOT WORK.
LIMITED WARRANTY
1 YEAR LIMITED WARRANTY- LEGAL
MOKENEYE warrants to the original purchaser only,
that all MOKENEYE consumer POWER TOOLS will be
free from defects in material or workmanship for a
period of one years from date of purchase.
BATTERIES AND CHARGERS are warranted for 1
years. Original purchasers should also retain their
receipt as proof of purchase.
Notwithstanding the foregoing, if a MOKENEYE
consumer portable power tool is used for industrial,
professional or commercial purposes, the foregoing
warranty will apply for a duration of ninety days.
SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE
REMEDY under this Limited Warranty and, to the
extent permitted by law, any warranty or condition
implied by law, shall be the repair or replacement of
parts, without charge, which are defective in
material or workmanship and which have not been
misused, carelessly handled, or repaired by persons
other than Seller or Authorized Service Station. To
make a claim under this Limited Warranty, you must
return the complete product, transportation prepaid,
to any MOKENEYE Factory Service Center or
Authorized Service Station. For Authorized
MOKENEYE Power Tool Service Stations, please
contact Amazon Store Customer Service.
This limited warranty does not apply to accessory
items such as circular saw blades, drill bits, router
bits, jigsaw blades, sanding belts, grinding wheels,
blower nozzles and other related items.
In no event shall seller be liable for any incidental or
consequential damages (including but not limited to
liability for loss of profits) arising from the sale or use
of this product. Some states in the U.S. and some
Canadian provinces do not allow the exclusion or
limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to
you.
Cause
Remedy
Battery pack is
depleted.
Charge the battery.
Tool is over-
loaded.
Release the variable-speed
trigger switch and try again.
Battery pack is
over
temperature.
Turn off the Tool and cool the
battery pack under air flow.
Battery pack is
not installed
properly.
Confirm battery is locked and
secured to the tool.
Burned out
switch.
Have the switch replaced by an
Authorized MOKENEYE Service
Center or Service Station.
