Waste disposal
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
●
Troubleshooting:
a.
Reset: When the LED shows
"
" , press “▼” button until the desk reaches its
lowest
height and rebounds to stop, the reset has been finished.
b.
If
LED shows "E01" or "E02", please retry 18 mins later
, desk overuse
.
c.
If the “▼” button does
n
't work, please check cable connection
s
and then
unplug
power for at least 10 seconds. Reconnect power and press “▼” button to start the
reset
process when it shows the "
".
d.
Still not working?
, pl
ease
contact
MojoDesk
customer service
800-297-6656
.
3. Operating Instructions
●
Height Adjust
ment
:
Press the"▲" or "▼" button to adjust the height. The LED display shows the current height.
Set
Memory
Positions
:
a.
Press
the
"▲" or "▼"
button
to
adjust
to
the
desired
height
b.
Press
and release
"M" to
enter memory setting mode
and the screen will display " "
c.
Press 1, 2,
" "
, or
, " " t
o
save the height to the corresponding position which will
show in the display screen as " " ," ", or " ", or " ";
Move to Memory Positions:
Press
and release the
"1", "2"
,
" "
, or
" "
button to automatically adjust
to the
saved
position
.
●
●
Anti-collision sensitivity adjustment - optional:
Press and hold the “▲” “▼” button
s
for 5 seconds at the same time to switch the
sensitivity.
Once the display shows " #" it has cycled to the next setting. Release
buttons and repeat to cycle through settings.
“
”, the anti-collision function is off; " ", low sensitivity
“
", medium sensitivity; " ", high sensitivity (default)
●
Anti-collision:
During height adjustment,
if
tabletop comes in contact with another
object, it
instantly stops and reverses to avoid damage.
●
Child lock function:
a. To engage or disengage child lock, press and hold the M button for about 5 seconds.
b.
When child lock is turned on,
a
blue
LED
light
activates above
"▼"
and
M
.
A
ny
button
press creates a flash of the blue LED, a beep and LOC on the display
c.
Only when the child lock is unlocked,
will
all the buttons work normally.
●
