©Mojotone
®
Tweed Super
®
Style Amp Kit Manual 2012
Page 1
Mojotone Tweed Super
®
Style
Amp Kit Instruction Manual
Tools needed for build:
•
40 W Soldering Iron
•
Wire Cutters / Stripper
•
Needle Nose Pliers
•
Phillips Head Screwdriver
•
Small Flat Head Screwdriver
•
AC/DC Multimeter with Resistance Reading
•
44 Rosin Core Solder
Lay out parts for a quick inventory (Photo 1)
•
Compare physical inventory to the included bill of materials. Packaging mistakes are rare for Mojo but
double check us before you start your build.
Install chassis mounted hardware
•
Tube Sockets - Install so that they all face the same direction (noting pin #1 orientation)
•
Power Transformer - Make sure to mount the PT so that the label faces toward tube sockets. This will be
helpful for anyone looking at the transformer model number without having to take the chassis out of the
amp.
•
Output Transformer - Feed wires through grommets and note wire locations.
•
Install Potentiometers.
•
Install Input, Output Jacks, and Switches.
•
Fuse Holder - Install fuse at same time so you won’t forget.
•
Pilot Light Assembly (Lens and Bulb)
Photo 1 - Lay out parts for quick inventory
