5
6
When the headset is powered off, press and hold the power
button for 5 seconds, listen for “power on” and a pairing tone.
The indicator light will flash to indicate. It is in pairing mode.
In your Bluetooth settings, search for “MOJO2” and tap to
connect. Listen for an indicator sound to indicate successful
pairing. The indicator light will be turned off after successful
pairing.
Choose “MOJO2” from your device’s Bluetooth settings and
select unpair. Wait for an indicator sound to indicate successful
unpairing. After unpairing, the indicator light will flash to
indicate it is ready to be paired with another device.
When the headset is powered on, it will automatically connect
to the last connected device. You can also manually connect it
to another device via Bluetooth settings. Once the headset is
connected, the indicator light will be turned off. If connection is
unsuccessful, the indicator light will keep on flashing.
Pairing
Unpair
Connect
In your Bluetooth settings, search for “MOJO2” and select to
disconnect. Listen for an indicator sound to indicate successful
disconnect.
Disconnect
In the connected state, if the distance between the headset and
the connected device exceeds the Bluetooth communication
range, the connection will be disconnected. The headset will
enter into pairing mode with the indicator light flashing. If the
distance between the headset and the connected device returns
to the Bluetooth communication range within 10 minutes, the
headset will automatically be connected again. If the headset is
not reconnected within 10 minutes, the headset will shut down
automatically.
Reconnect
automatically