MoJack HDL 45501 Instructions For Assembly And Operation Manual Download Page 2

2

3

MoJack HDL Mower Lift |

| MoJack HDL Mower Lift

WARNINGS AND SAFETY INSTRUCTIONS

INTRODUCTION

NOTE: Location of unit Serial Number.

IMPORTANT: 

The mower lift is intended for use with mowers only.  Do not exceed 500 lbs. (226 kg) front end weight.  It should 

never be used to service other types of machinery unless there is an approved accessory fitted for the type of machinery. 

Read and understand all safety and operating instructions before using the mower lift.   
Never allow anyone unfamiliar with the safety or operating instructions to use the lift.
Follow all safety and servicing instructions provided by the lawn mower’s manufacturer before using the lift. 
Do not modify the lift in any way. Any modifications will void any and all warranties and could compromise your  
personal safety. 
When using the lift, keep ALL bystanders at a safe distance away from the mower lift.
The lift must be used on a solid level surface.
Only lift the FRONT end on the mower. 
Do not lift the front end and back end of the mower at the same time.
Only use the lift for mowers that are less than 500lbs (226 kg) front end weight and properly fits in the provided  
wheel pads. (ie. 10” to 17” diameter and within the inside to outside wheel measurements of 18.5” to 47.5”).
Wheel pads must be equal distance from the T-Bar to maintain proper balance.
Always stop engine and remove key before beginning any work on the mower.
Always engage the mower’s parking brake when using the lift.
Never operate the engine while using the mower lift.
Do not exceed the lifting capacity of 500 lbs. (226 kg) front end weight. If you have a question regarding weight of your  
machine, please contact MoJack at 1-877-575-3173.
Safety Locking Handle must be locked before starting any service on mower. 
Do not remove safety warnings or decals from lift.
Before each use, always check for any worn, loose or damaged parts on the lift. If any damaged parts are present,  
do not use the lift and call MoJack at 1-877-575-3173.
Do not climb on mower while it is lifted, being lifted or being lowered. 
No one should be on the mower while it is lifted, being lifted or being lowered.
Always place wheel chocks (not included) behind the back tires of the mower before beginning maintenance. 
Wheel Pads must be equal distance from the Lift Arm to maintain proper balance. 
Always secure front mower tires with enclosed safety straps.
When using the attachment for lawn mowers, DO NOT lift the back of the lawn mower. Proper use of the attachment is to lift 
the side of the lawn mower for maximum stability. 
Some mowers which are equipped with a fuel tank vent may spill fuel when lifted.  If this happens, run fuel level down in the 
tank to prevent spilling.
Always use proper personal protection equipment.
Inspect before each use. If any damage, STOP, do not use.
Please make sure that the space below the mower is big enough.
Please make sure that the mower is stable enough for work.
Failure to follow these warnings may result in property damage and serious bodily injury or death.

This manual contains assembly, parts, operating, 
maintenance, adjustment and safety instructions 
for your MoJack HDL lift.

BEFORE USING YOUR MOJACK HDL,  

CAREFULLY READ THIS MANUAL IN ITS  

ENTIRETY.

By following these operating, maintenance and safety 
instructions, you will prolong the life of your MoJack 
lift and promote safe operation.

If additional information is needed, or should you  
require a trained service mechanic, contact your  
authorized MoJack equipment dealer or distributor 
or call MoJack at 1-877-575-3173.

All MoJack parts are thoroughly tested and inspected 
before leaving the factory to ensure that they comply 
with all relevant safety standards.

NOTE:

 Please save this manual for future reference.

Patent #s: U.S., 8,448,920

 © 2013 (MoJack Distributors, LLC)

MoJack and the MoJack logo are registered trademarks of MoJack Distributors, LLC.

MoJack HDL is a trademark of MoJack Distributors, LLC.  All rights reserved. 

Submit your questions online at:

www.theMoJack.com

Need Assistance?

Please DO NOT return this product to the store.

Our Customer Service Department is ready to help!

1-877-575-3173

Summary of Contents for HDL 45501


















Reviews: