MoJack 750XT Lift
11
Operating Instructions
Preparing the MoJack 750XT for Use (Steps 1 - 8)
STEP 2
Top Bar
Carrier
Clevis Pin
hole
Lift Arm
Top Bar of Carrier
Carrier
Small Hair Pin
Clevis Pin
Installing Lift Arm
• Hang the Lift Arm on the Carrier by hooking the slotted area
of the lift Arm under the top bar of the Carrier. Lift Arm must
be inserted from the front and then lowered which fastens
Lift Arm into place.
• Secure Lift Arm to Carrier with Clevis Pin and Small Hair Pin.
STEP 1
Unfolding MoJack 750XT
• Pull locking pin out to unlock.
• Raise the Tower by pulling up on the Grip Handle.
Once the Tower is in the vertical position, lift up on
the Grip Handle and drop the Tower into the Base.
• The tower will be securely locked in place when the
locking pin retracts and the tower is snug in the
channel behind the crossbar.
Tower Locking
Pin
(locked position)
Tower Locking Pin
(unlocked position)
Crossbar in
channel
Crossbar
Drop Tower into Base
Tower Locking Pin
(unlocked position)
When Tower is
above the bar,
unit is NOT
locked and
UNSECURE.
When Tower sits
behind the bar,
unit is locked
and
fully secure.
