iv
•
To completely shut off power to the unit,
turn the keyswitch anti-
clockwise (
STANDBY
position), switch the mains power switch at rear
of unit to
OFF
, and unplug the unit.
•
When the
STANDBY
/
RUN
keyswitch is on
STANDBY
, there cannot be
power to the laser diode,
but power is still being supplied to the
laser head for temperature control.
WARNING
The internal circuit board and piezoelectric transducers are at high
voltage
during
operation.
The
unit
should
not
be
operated
with
covers removed.
CAUTION
Although the
CEL
is designed and priced with the expectation that
the end-user can replace the diode and change the alignment, some
components are fragile.
In particular the filter, piezo actuator, and
output coupler are very easily damaged.
Please take care of these
items when working inside the laser.
The filter and output coupler are hard-coated and can be cleaned
but great care is needed as with any intracavity laser optics.
NOTE
MOGL
abs products are designed for use in scientific research labora-
tories. They should not be used for consumer or medical applications.
Label identification
The International Electrotechnical Commission laser safety standard IEC
60825-1:2007
mandates
warning
labels
that
provide
information
on
the
wavelength
and
power
of
emitted
laser
radiation,
and
which
show
the
aperture
where
laser
radiation
is
emitted.
Figure
shows
examples
of
these labels, and figures 2 and 3 show their location on the
CEL
laser and
large-chassis
CEF
version.
Summary of Contents for CEF
