manualshive.com logo in svg

MOGAS C Series, Installation, Operation And Maintenance Manual, Page: 30 / 31

Share
Download
MOGAS C Series Installation, Operation And Maintenance Manual Download Page 30

ESI-6121 Rev D   © Copyright 03/2022 MOGAS Industries, Inc.   

www.mogas.com

ESI-6121 Rev D   © Copyright 03/2022 MOGAS Industries, Inc.  

 www.mogas.com

58

59

Valve information is provided on the body in the 
locations shown.

1

 

VALVE SERIAL NUMBER

2

 

SIZE

 

PRESSURE CLASS

 

PRESSURE END

 IDENTIFICATION

3

 MANUFACTURER

 

SIZE

 

PRESSURE CLASS

 

MODEL

 MATERIAL
 

HEAT NUMBER

 

SERIAL NUMBER

 

MAX. TEMPERATURE

 

BODY PART NUMBER

4

  END CONNECTION  

  PART NUMBER

 MATERIAL
 

HEAT NUMBER

5

 

SIZE

 

PRESSURE CLASS

Additional information may also be provided on 
identification tags per customer request.

All valve or valve parts that are 

returned

 require a 

Return Merchandise Authorization (RMA). Please  
have the following information available prior to 
submitting an RMA request:

•  Serial number
•  Valve owner
•  Application specifics (where the valve is used)
•  Media (what goes through the valve)
•  Total estimated cycles (from last installation)
•  Operating temperature (max. F)
•  Operating pressure (max. PSI)
•  Actuator specifics

Contact the MOGAS Service department to obtain 
authorization and to receive shipping instructions.  
The RMA request may also be submitted online  
by accessing the 

Service

 page of our website 

(

www.mogas.com

).

MOGAS Service may be reached  
24 hours per day / 7 days per week. 

Telephone: 

+1 281.449.0291

 

Email: 

[email protected]

1

3

2

4

5

Locate Valve Information

Return Merchandise Authorizations (RMA)

Service Contact

Summary of Contents for C Series
































Reviews:

No comments