ESI-6136 © Copyright 09/2018 MOGAS Industries, Inc.
www.mogas.com
5
LIFTING LUG LOCATIONS
SPREADER BAR FOR LIFTING
Receiving and Inspection
REMOVE VALVE
Valves are shipped in seaworthy export packed
wooden crates that are plastic lined.
Carefully remove the valve (and operator, if supplied)
from the shipping crate or pallet by using lifting lugs
with spreader bar.
INSPECT VALVE EXTERNALLY
Inspect the general condition of the valve (and
operator, if supplied) for any potential shipping
damage.
Review the valve manual, assembly drawing with the
bill of materials, and the operator manual (if supplied)
shipped with the valve.
INSPECT VALVE INTERNALLY
Remove protective covers from valve ends. Inspect
valve internally for shipping debris or damage.
Replace protective covers until ready for installation.
1
2
3
4
VERIFY OPERATOR
If the valve was ordered with an operator from
MOGAS, it should arrive pre-assembled and tested
from the factory. If already assembled, continue with
the valve installation.
If the valve
does not
include an operator, the
appropriate adaptor and operator
must
be installed
to cycle the valve prior to installation.
Note:
It is recommended that operator installation only be
performed by authorized MOGAS service personnel.
CAUTION!
Do not
lift by the operator alone. Lift using all four
lifting lugs. Use a spreader bar to avoid damage or
contact with operator or motor.
!
