Moffat Vgen V2GGE13, Operating & Service Manual

Page: 6 / 12

6
4: Operation
The oven must be connected to the correct power
supply, with the correct rating for the appliance. This
information should be found on the data badge on
the oven. If in doubt, speak to a qualified electrician.
Do not attempt connection to any other power
supply which differs from the data badge.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Plug in appliance and establish power.
Ensure the three way switch is set in the
"standby"
position,
Switch the unit on at the isolator / main switch,
Note: There are separate controls for each oven left and right,
The temperature can be adjusted between 50°C and 200°C.
Turning the temperature control right will increase the temperature.
Turning the control left will decrease the temperature.
To set the control temperature turn the knob until the preferred temperature
setting is displayed, then simply press in the control knob and release.
The timer can be set to any time limit from infinity to 999min
Turning the time control right will increase the time setting
Turning the control left will decrease the time setting.
The control can be turned left until "inf" is displayed
"inf"
indicates infinity setting (oven is always on)
Set the three switch way to the bottom position
"cook"
Depress the Time control knob to set the time and start the countdown.
At the end of the cook cycle an audible alarm will sound,
and END will be displayed.
To stop the alarm, press and release the time knob.
To stop the cooking, press and hold the time knob for 3 seconds
The food is now ready for service.
Set the three way switch to the Top position "Serve"
The oven will automatically switch from cook to keep hot (90°C)