About the controls and settings.
Consumer Support
Troubl
eshooting Tips
Operating
Instructions
Safety Instr
uctions
Installation
Instructions
Car
e and Cl
eaning
Setting the Temperature Control
When the Wine Chiller is Plugged In
After plugging in the wine chiller and making your
temperature selection, allow the wine chiller to
reach the set temperature before loading your
wine . This may take up to 12 hours to completely
stabilize .
After loading the wine, you may notice a rise
in the temperature . Allow adequate time for
the temperature to return back to the set
temperature . This may take up to 12 hours to
completely stabilize .
Display Panel
You can set the temperature as you desire
by pushing the button
(Up)
or
(Down)
. When you push the two buttons for
the first time, the
LED
readout will show the
original temperature set at the factory (the
temperature preset at the factory is 50ºF/10°C) .
The temperature that you desire to set will
increase 1ºF (0 .5°C) if you push the
once .
The temperature will decrease 1ºF (0 .5°C) if you
push the
once .
Temperature Display Panel (Wine Types)
SPARKL:
41-45°F (5-7°C)
WHITE:
46-54°F (8-12°C)
RED:
55-65°F (13-18°C)
Power Button
The
Power
button turns the cooling system off .
5
Lock/Unlock Key Button
Pressing the
lock/unlock key, 1 min later the
keyboard will be locked not including the
key .
There are 2 short "ding" sounds when locked .
Press
for one second to unlock . There is a
one second long "ding" when unlocked .
Interior Light
You can turn the interior light on or off by pushing the
button .
Important:
Initially, the temperature defaults to 50°F (10°C)
factory setting . When it restarts (ie . after a
power failure), it will default back to factory
the factory setting .
In order to extend the compressor life, please
restart wine cooler after waiting 3 minutes .
Malfunction indicators:
Sensor problem show E1;
Self diagnostic error show E3;
Communication problem show E4;
Too cold in cabinet show L .
In this condition, a buzzer will hum for one second
every 30 seconds .
Call for service if any of the above error messages
show .
You should touch the temperature control panel
softly as the panel is touch screen control . Please
protect the touch control panel carefully to avoid
scratching,keep far away from strong magnetic
fields and high humidity, or it can cause wine
cooler to not work properly .
Summary of Contents for MWR02
Page 10: ...Notes 10...
