6
Electronic Programmer
4
5
1
2
3
6
7
8
The oven will work only if the time of
day has been set.
Moreover, the oven
can also be operated without any
programme.
Setting the time of day
When the power supply is switched on, or after
a power failure, the “Time of day” pilot lamp will
flash on the display.
To set the correct time of day:
1.
press button “ ” or “ ”.
2.
After the setting is carried out, wait for 5
seconds: the “Time of day” pilot lamp will
go out and the display will show the set
time. The appliance is ready for use.
To reset the correct time of day:
1.
press button
repeatedly to select the
“Time of day” function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The time of day can only be reset if no
automatic function (cook time or end of
cooking time) has been set.
“Cook Time” function
This function allows the oven to automatically
switch off at the end of a programmed cooking
duration time. Place food in the oven, select
a cooking function and adjust the cooking
temperature.
In the event of a power failure, all the
settings (time of day, programme
setting or programme in operation)
will be cancelled.
When the power is restored, the
numbers in the display will flash, and
the clock/timer has to be reset.
1.
Control button for selecting a function
2.
Decreasing control button “ ”
3.
Increasing control button “ ”
4.
Display
5.
“Cook Time” pilot lamp
6.
“End time” pilot lamp
7.
“Countdown” pilot lamp
8.
“Time of day” pilot lamp
