Electronic programmer
1.
Push button for selecting
a function
2.
Decreasing control button “
”
3.
Increasing control button “ ”
4.
Display
5.
“Cooking Duration” pilot lamp
6.
“End of cooking” pilot lamp
7.
“Minute minder” pilot lamp
8.
“Time of day” pilot lamp
4
5
1
2
3
6
7
8
The oven will work only if the time
of day has been set.
Moreover, the
oven can also be operated without any
programme.
Setting the time of day
When the power supply is switched on, or after
a power failure, the “Time of day” pilot lamp
will flash on the display.
To set the correct time of day:
1.
press button “ ” or “
”.
2.
After the setting is carried out, wait for 5
seconds: the “Time of day” pilot lamp
will go out and the display will show the
set time. The appliance is ready for use.
To reset the correct time of day:
1.
press button
repeatedly to select the
“Time of day” function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The time of day can only be reset if no
automatic function (cook duration
or
end of cooking
) has been set.
“Cooking Duration”
function
This function allows the oven to automatically
switch off at the end of a programmed cooking
duration time. Place food in the oven, select a
cooking function and adjust the cooking tem-
perature.
