12
Cleaning and Maintenance
General
Clean the griddle regularly. A clean appliance looks better, will last longer and will perform better.
Carbonised grease on the surface of the griddle plate will hinder the transfer of heat from the
cooking surface to the food. This will result in loss of cooking efficiency.
NOTE: Each Heavy Duty Griddle is supplied with a scraper tool and a pack of blades for cleaning
the griddle surface.
- 1 Flat Blade (pack) - 1 Ribbed Blade (pack) and 2 handles for Ribbed Heavy Duty Griddle.
- 1 Flat Blade (pack) and I handle for Smooth Heavy Duty Griddle.
NEVER use the ribbed scraper blade on the flat chrome surfaced griddle plate.
Replacement blades and handles can be purchased separately. Refer to the 'Replacement
Parts List' at the rear of the manual.
DO NOT use water on the griddle plate while this item is still hot as warping and
cracking may occur. Allow the griddle plate to cool down before cleaning.
NOTE:
DO NOT use strong solvents, abrasive or caustic detergents as they could corrode or
damage the griddle.
To prevent rust forming on the griddle plate (Steel Plate), ensure that any detergent or
cleaning material has been completely removed after each cleaning. The appliance should
be switched ‘On’ briefly to ensure the griddle plate is dry. Spread oil or grease over the
griddle surface to form a thin protective greasy film.
To keep your griddle clean and operating at peak efficiency, follow the procedures shown below:-
After Each Use
1.
Clean the griddle with the supplied scraper tools to remove any food debris.
2.
Always ensure that the scraper tool blades are changed regularly to ensure that the scraper tool
works efficiently and prevents damage to the griddle plate surface.
Always turn ‘Off’ the electrical supply before cleaning the range.
This appliance is not water proof.
Do not use water jet spray to clean interior or exterior of this appliance.
Caution
B
LADES
FITTED
TO
SCRAPER
TOOL
ARE
EXTREMELY
SHARP
AND
ARE
TO
BE
USED
WITH
CARE
.
Warning
Always apply even pressure over the whole surface of the scraper tool when
using on the flat surface of the griddle, to prevent scoring of griddle surface.
NEVER bang the sharp edge of the scraper tool on the flat surface of the griddle
as this will damage the griddle and invalidate the warranty.
Caution
Summary of Contents for BLUE SEAL EVOLUTION Series
Page 22: ......