70mm
4
5
6
3
4
Drill a mounting hole with a diameter of 10mm and a depth of 70mm at
the drawn outline, and drive in stainless steel expansion screws.
在画出的轮廓处钻直径
10
mm，深
70
mm的安装孔，并打入不锈钢膨胀螺
钉。
塑料套筒
Plastic Sleeve
Install the plug on the stainless steel expansion screw and tighten it
with the allen key and the
plastic sleeve
.
Note: Please install the plug hole in dislocation as shown in the figure.
将堵头安装到不锈钢膨胀螺丝上，并利用内六角扳手跟套筒组合使用将其
上紧。
注意：请将堵头的孔位如图错位安装。
紧定螺钉
Set Screw
将产品主体套入堵头，使用紧定螺丝将产品安装在堵头上，并上紧。
Put the main body of the product into the plug, use a set screw to install
the product on the plug, and tighten it.
安装完成，确认产品已经安装牢固，电源线正确连接后，方可通电使用
产品。
After installation, ensure that the product is installed firmly and the
power cord is correctly connected before the product power on.
Undercounter Installation
φ10mm
Undercounter Installation
