INS10634C - 11/18
Refer to the installation instructions of the panel switch to connect the
power cord and tighten the panel switch to the switch box.
After the installation, check if the product is installed firmly and the
power cord is correctly connected before product power on.
参考面板开关的安装说明将电源线进行连接，将面板开关上紧在开关盒上。
安装完成，确认产品已经安装牢固，电源线正确连接后，方可通电使用产
品。
9
控制面板
Control Panel
Undercounter Installation
Undercounter Installation
6
控制面板操作
开关指示灯
总开关 定时指示灯 定时开关
•
电源开关
：按下电源开关，开关指示灯亮，毛
巾架进入常开加热模式。
•
定时开关
：开关为循环切换模式，4h/2h循环选
择；切换至4h模式时，4h定时指示灯亮，产品加
热4小时后，电源自动关闭，加热停止；切换至2h
模式时，2h定时指示灯亮，产品加热2h后，电源
自动关闭，加热停止。
•
开关具有温控功能，温控范围45~55℃，可防止
温度过高导致烫伤。
Panel Operation Instructions
Switch indicator
Master
switch
Timing
indicator
Timing
switch
•
Power switch
: Press the power switch, the switch
indicator light is on, the towel rack enters the
heating mode.
•
Timing switch
: The switch is in cycle switching
mode. It has 4h/2h cycle selection. When selecting
4h mode, the 4h timing indicator light is on. After
the product is heated for 4 hours, the power is
automatically turned off and the heating stops.
When selecting 2h mode, the 2h timing indicator
light is on. After the product is heated for 2h, the
power is automatically turned off and heating stops.
• The switch has a temperature control function,
the temperature control range is 45
℃
~55
℃
, which
can prevent the temperature from being too high
and cause scald.